1)    An Analysis of Crack Extension in Creeping Solids
Engineering Fracture Mechanics, 13(1980), pp.819-828.
V.M.R.Krishnan, Y.Mutoh and A.J.McEvily
2) An Analysis of Grain Size and Yield Stress Effects on Stress at Fatigue Limitand Threshold Stress Intensity Factor
Trans. ASME, Journ. Eng. Mater. & Tech., 103(1981), pp.229-233.
Y.Mutoh and V.M.Radhakrishnan
3)    SUS304鋼溶接ボンド部における疲労き裂伝ぱ挙動
溶接学会論文集, 1-1(1983), pp.45-51.
4)    Fatigue Crack Propagation in the Weld Bond Region of a Type 304 Stainless Steel
Advances in Fracture Research, Pergamon Press, 3(1984), pp.1695-1702.
Y.Mutoh and I.Sakamoto
5)    SUS304鋼溶接金属の疲労き裂伝ぱ挙動
溶接学会論文集, 3-2(1985), pp.416-421.
6)    単一過大荷重負荷後の遅延挙動におよぼす溶接残留応力の影響
溶接学会論文集, 3-4(1985), pp.843-851.
7)    高強度焼結鋼の疲労強度に及ぼす密度の影響
日本機械学会論文集(A), 52-473(1986), pp.81-88.
8)    Effect of Yield Stress and Grain Size on Threshold and Fatigue Limit
Trans. ASME, Journ. of Eng. Mater. & Tech., 108(1986), pp.174-178.
Y.Mutoh and V.M.Radhakrishnan
9)    On Fatigue Crack Growth in Stage ・
The Behaviour of Short Fatigue Cracks, EGF Publ., (1986), pp.87-99.
V.M.Radhakrishnan and Y.Mutoh
10)   SM50A鋼およびSUS304鋼溶接継手の下限界近傍における疲労き裂伝ぱ特性
溶接学会論文集, 4-4(1986), pp.709-715.
11)   異種金属電子ビーム溶接継手の高温低サイクル疲労破壊特性
材料, 36-402(1987), pp.280-285.
12)   異種金属電子ビーム溶接継手の高温低サイクル疲労寿命推定
材料, 36-402(1987), pp.286-291.
13) The Effect of Residual Stress Induced by Shot-Peening on Fatigue Crack Propagation in Two High Strength Aluminum Alloys
Fatigue Fract. Engng. Mater. Struct., 10-4(1987), pp.261-272.
Y.Mutoh, G.H.Fair, B.Noble and R.B.Waterhouse
14)   異種金属電子ビーム溶接継手のクリープ疲労破壊特性
材料, 36-410(1987), pp.1239-1245.
15)   Low-Cycle Fatigue Strength ans It’s Prediction for Dissimilar-Metal Electron Beam Welded Joint at High Temperature
High Temperature Creep-Fatigue, CJMR, Vol.3, Elsevier Applied Science, (1988),
M.Okazaki, Y,Mutoh and Y.Itoh
16)   Creep-Fatigue Fracture of Dissimilar Metal Electron Beam Welded Joints at Elevated Temperature
Trans. ASME, Journ. of Eng. Mater. & Tech., 110(1988), pp.212-218.
M.Okazaki, Y.Mutoh and M.Yamaguchi
17)   異種金属電子ビーム溶接継手のクリープ・疲労強度とその推定
材料, 38-425(1989), pp.168-174.
18)   Post-SPF Fatigue Properties in Ti-6Al-4V Alloy
Superplasticity and Superplastic Forming, TMS, (1989), pp.637-641.
Y.Mutoh, M.Kobayashi, Y.Mae and K.Toyofuku
19)   Ti-6Al-4V合金の疲労強度および微小疲労き裂伝ぱにおける微視組織の重要性
軽金属, 42-11(1992), pp.627-632.
20)   高速度鋼(粉末ハイス)の疲労特性に及ぼす炭化物粒径の影響
日本機械学会論文集(A), 59-566(1993), pp.2213-2219.
21)   疲労破壊(連載 鋼構造物の破壊)
非破壊検査, 46-7(1997), pp.492-495.
22)   Subsurface Crack Propagation in Rolling Contact Fatigue of Sintered Alloy
JSME International Journal A, 46-3(2003), pp.341-347.
Y. Miyashita, Y. Yoshimura, J.Q. Xu, M. Horikoshi, Y. Mutoh
23)   On the number of Overload-induced Delay Cycles as a Function of Thickness
International Journal of Fatigue, 26(2004), pp.1311-1319.
A.J. McEvily, S. Ishihara, Y. Mutoh
24)   Rolling Contact Fatigue Behavior of Sintered Alloy
Damage Tolerant Design and Materials, (2004), pp.236-239.
T. Nagahama, Y. Yoshimura, M. Horikoshi, R. Gnanamoorhty, Y. Miyashita, Y. Mutoh
25)    In situ Observation of Fatigue Crack Retardation in Banded Ferrite-Pearlite Microstructure due to crack branching
Scripta Materialia, 54-11(2006), pp.1835-1840.
Akhmad A. Korda, Y. Mutoh, Y. Miyashita, T. Sadasue, S. L. Mannan
26)    Effect of Pearlite Morphology and Specimen Thickness on Fatigue Crack Growth Resistance in Ferritic-Pearlitic Steels
Materials Science and Engineering A428(2006), pp.262-269.
Akhmad A. Korda, Y. Mutoh, Y. Miyashita and T. Sadasue
27)    Fatigue Crack Growth Behavior in Ferritic-Pearlitic Steels with Networked and Distributed Pearlite Structures
International Journal of Fatigue, 29(2006), pp.1140-1148
Akhmad A Korda, Y. Miyashita, Y. Mutoh and T. Sadasue
28)    Stress Shielding and Fatigue Crack Growth Resistance in Ferritic-Pearlitic steel
Materials Science and Engineering A, 468-470(2007), pp.114-119.
Y. Mutoh, Akhmad A. Korda, Y. Miyashita, T. Sadasue
29)    Estimation of Fatigue Strength of Fabricated Component
ASME Paper, MSEC2007-31058, (Proc. of MSEC2007)
Duangporn Ounpanich, Yoshiharu Mutoh, Kenji Yoshii
30)    Fatigue Behavior of Hot-rolled Steel Plate at Various Stages of Fabrication
Materials Science and Engineering A477(2008), pp.386-394
Duangporn Ounpanich, Yoshiharu Mutoh, Kenji Yoshii
31)    Plain fatigue and fretting fatigue behavior of hot-rolled steel sheet after cold spinning
Materials Science and Engineering A509(2009), pp.14-22
Duangporn Ounpanich, Yoshiharu Mutoh, Kenji Yoshii
32)    Influence of Second Phase Particle on Fatigue Crack Growth Behavior in Ferrite Matrix Steels
Journal of Solid Mechanics and Materials Engineering, 3-10(2009), pp.1101-1114